To add your Ultrasound/Follicle results, click on the Plus Icon icon in the bottom navigation bar and choose the U/S icon.
If you do not see the U/S Icon, it’s because you haven’t started a new cycle. You can do that in the same area.
Your first time logging your ultrasound results, you’ll be prompted to choose the date of your baseline ultrasound and how many follicles were found on each ovary, along with your lining.
Note that if your clinic/ultrasound tech uses cm as the measurement types, you can easily convert them as 1 cm = 10 mm (i.e. 1.5cm is 15mm, 1.2cm is 12mm, etc).
For additional monitoring reports, click on the add report button.
The follicles and lining progression are shown visually at the top of the page.
All follicles under 10mm, between 11mm and 17mm and above 18mm are grouped together.
If you make a mistake, you can click on the edit button (3 dots), next to any given date and you’ll be promoted to enter the correct measurement.
To see how this cycle stacks up against previous cycles, click on compare in the drop down button on the top right hand corner.